Home

Pilot controlled proportional pressure reducing valves with DC motor operation with sandwich plate design DRS, ZDRS 

• Size 6
• Component series 1X
• Max. operating pressure 210 bar
• Flow, max. 30 l/min

Pilot controlled Proportional pressure reducing valves with DC motor operation for subplate mounting DBG

• Size 8 to 32
• Component series 1X
• Maximum operating pressure 315 bar
• Maximum flow 600 l/min

Throttle valves of sandwich plate design Z.FG

• Component series 3X
• Size 10
• Maximum operating pressure 315 bar
• Maximum flow 160 l/min

Directional spool valves 5-.WE (5-chamber version), 4/3, 4/2 and 3/2 direct operated influencing the switching time for sub plate mounting 

• 5-chamber version
• Size 10
• Component series 5X
• Maximum operating pressure 420 bar [6091 psi]
• Maximum flow 150 l/min [39.6 US gpm]

On/off directional seat valves with solenoid actuation KSDER.0 N/P 2/2 direct operated High Performance

• Size 0
• Series A
• Maximum working pressure 350 bar
• Maximum flow 20 l/min

Pilot operated On/off check valves of sandwich plate design SL & SV 10 to 32

• Size 10, 20, and 32
• Component series 4X
• Maximum operating pressure 350 bar
• Maximum flow 550 l/min

HC3-H versions: 11 different intensification factors

• P_IN: 20 - 207 bar (inlet pressure)
• P_H: 500 bar maximum (outlet pressure)
• P_RETURN: As low as possible (Return pressure to tank)
• Intensification ratios: P_H = (P_IN - P_Return) i (Intensification)
• Mounting: NG6 (D03) stacking manifold system

HILMA WZ 2.2451 Wedge Clamps for Straight Clamping Edge double acting, operating force 35 up to 120 kN, hydraulic clamping and unclamping, without and with position monitoring at the side

• Adm. retaining force: 35 .. 120 kN
• Cylinder diameter: 25 .. 50 mm
• Max. clamping pressure: 50 bar
• Temperature resistance: up to 100/160°C (on request: up to 300 °C)

ROEMHELD B1.8801 Swing Clamps with Reinforced Swing Mechanism: top flange, position monitoring optional, double acting

• Maximum operating pressure 500 bar
• Maximum clamping force: 6.8 - 41 kN
• Rod diameter: 32 - 50 mm
• Piston diameter: 40 - 63 mm
• Clamping stroke: 20 - 22 mm
• Maximum flow rate: 20 - 55 cm³/s

Hydraulic swing clamps are used for clamping of workpieces when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.

ROEMHELD B1.494 Spring Clamping Cylinder: pulling, with hydraulic return

• Max. operating pressure 250 ...320 bar
• Max. clamping force: 16 - 100 kN
• Unclamping stroke: 0.5 and 1 mm
• Unclamping pressure: 210 - 300 bar

ROEMHELD B1.711 Hydro Cylinder with Locking Piston single acting with spring return

• 3 body variants; threaded-body, block and low-block cylinders
• Single acting with spring return
• Maximum operating pressure 500 bar
• Fixtures without tubes are possible

Hydro cylinders with locking piston are singleacting plunger cylinders, similar to the design of the proved threaded-body cylinders as per data sheet B 1.461. When pressurising the element, the piston will be expanded and locked in the cylinder body.