Home

ROEMHELD B1.494 Spring Clamping Cylinder: pulling, with hydraulic return

• Max. operating pressure 250 ...320 bar
• Max. clamping force: 16 - 100 kN
• Unclamping stroke: 0.5 and 1 mm
• Unclamping pressure: 210 - 300 bar

ROEMHELD B1.711 Hydro Cylinder with Locking Piston single acting with spring return

• 3 body variants; threaded-body, block and low-block cylinders
• Single acting with spring return
• Maximum operating pressure 500 bar
• Fixtures without tubes are possible

Hydro cylinders with locking piston are singleacting plunger cylinders, similar to the design of the proved threaded-body cylinders as per data sheet B 1.461. When pressurising the element, the piston will be expanded and locked in the cylinder body.

ROEMHELD B1.560 Block Cylinder, with Anti-rotation Piston: aluminium housing for adjustable magnetic sensors, double acting

• Maximum operating pressure 350 bar
• Piston diameter 32 - 50 mm
• Rod profile P3G 22 - 40 mm
• Stroke 25 - 100 mmMax. push force: 28.1 - 68.7 kN

The FC10TE Hydraulic flange pulling tool can be used on any flange with a bolt hole diameter of 22mm (7/8”) or greater, and can pull from a distance of 600mm down to 0 mm with a force of 10T (100kN) per tool.

Directional spool valve for subplate mounting, pilot operated with electro-hydraulic actuation LS 1376

• Size 62
• Component series 1X
• Maximum operating pressure 250 bar
• Maximum flow 1500 l/min

HC3-H-NG10: 11 different intensification factors

• P_IN: 20–207 bar (inlet pressure)
• P_H: 500 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN – P_Return) i (intensification)
• Mounting: NG10 (D05) stacking manifold system

The HYDAC ETS 3800 with IO-Link is a compact electronic temperature switch featuring a 4-digit LED display and designed for use with a separate temperature probe. With a measuring range of -30 to +150 °C and IO-Link V1.1 communication, it enables seamless integration into modern automation systems, offering advanced parameterization and real-time data exchange.

Key Features:

• Measuring range¹) -30 . +150°C (-22 . 302°F)
• Display: 4-digit, LED, 7 segment, red, height of digits 7mm
• Connection, separate temperature probe Female cable connection: M12x1, 4 pole

Depending on the temp' range of the connected temp' sensor the measurement range of the ETS 3800 may be reduced.

Similar to a standard Jig Pin, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing's spring clip snaps into the pin's groove, holding the pin fully retracted by spring force and positively preventing removal.Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. Like standard Jig Pins, Captive Jig pins have an integral shoulder to keep the handle raised.

• Available in pin diameters from 3/16 to 1/2"
• Steel Black Oxide Finish

Carr Lane tapped-heel miniature clamp straps with a radius nose to provide firm workpiece contact. These clamp straps are available to accommodate stud sizes #10-32 to 3/8-16, each in a choice of strap lengths. This clamp strap can be ordered individually, or in a complete clamp assembly. The available assemblies are assembly with knurled-head screw, assembly with clamp rest and assembly with levelling foot.

• OD - 1"
• ID RANGE - .4688 - .7812"
• Imperial sizes with a variety of lengths

• OD - 3/4"
• ID RANGE - .3110 - .5315"
• Imperial sizes available with a variety of Lengths

• OD - 5/8"
• ID RANGE - .3110 - .5000"
• Imperial sizes available with a variety of Lengths