Home

The CV1 is a cartridge style directional valve which can be directly mounted to the Minibooster

The hydraulic in-line filter provides protection in hydraulic systems up to 350 bar

HC2D2: 8 different intensification factors

• P_IN: 20 - 207 bar (inlet pressure)
• P_H: 800 bar maximum (outlet pressure)
• P_RETURN: As low as possible (Return pressure to tank)
• P_OUTLET: P_H = (P_IN - P_Return) i (Intensification)
  The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media 2

HC1: 9 different intensification factors

• P_IN: 20 - 207 bar (inlet pressure)
• P_H: 800 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN - P_Return) i (intensification)
• Mounting: Inline tube

Components for full automatic production - from setting up to processing

Zero Point Clamping System SPEEDY classic

HILMA WZ 8.18350 Carrying Consoles for easy and efficient die change on the press bed

• Load/pair : 5 - 30 kN
• Length of support: 500 - 1250 mm

HILMA WZ 8.1834A Hydraulically Lifted Roller Bar for high loads and linear movement of dies

• Max. operating pressure: 400 bar
• Loads: up to 160 kN/m
• Roller spacing: 50 mm
• Length: up to 2500 mm (special lengths on request)
• for T-slot: 22, 28 or 36 mm
• 13/16" and 1 1/16"
• temperature range standard: 100 °C

HILMA WZ 6.2210 Sliding Clamps, Mechanical with integral high-pressure spindle

• T-slot as per DIN 650 18, 22 and 28 mm
• Clamping force: 40 and 80 kN
• Clamping stroke: 1.5 - 2.2 mm
• Max. tightening torque: 45 - 90 Nm
• Max. travelling path: 30 - 35 mm

HILMA WZ 2.2185 Pivot and pull clamp double-acting, max. 400 bar

• Max. clamping force: 104 - 160 kN
• Clamping stroke: 10 mm
• Tilting angle: 15°
• Max. flow rate 16 cm³/s

HILMA WZ 2.2480 Double-acting Extending Clamps with Mechanical Lock

• Max. clamping force: 200 kN
• Adm. retaining force: 250 kN
• Flow rate: 1.6 - 2.5 l/min
• Max. operating temperature: 70°C

HILMA WZ 2.1400 Pulling Spring Clamp Cylinders with Hydraulic Return

• Max. clamping force: 16 - 400 kN
• Unclamping stroke: 0.5 and 1 mm
• Unclamping pressure: 210 - 300 bar