Home

ROEMHELD B1.733 Position Flexible Clamping Claw double acting, separate locking port, with optional position monitoring, max. operating pressure 250 bar

OBSOLETE ITEM - CONTACT HYQUIP

• Operating pressure 250 bar maximum
• Maximum clamping force is 7.5 kN
• Maximum retention force is 10 kN
• Pendulum range: ±4 mm

The position flexible clamping claw consists of an U-shaped mounting body and the displacably embedded clamping unit with oil supply by two short high-pressure hoses with swarf protection.

ROEMHELD B1.480 pull-type, single and double acting, with anti-rotation device max. operating pressure 500 bar

• Maximum pulling force is 24.5 kN
• Single & double acting
• Clamping stroke, pulling - 6.0 mm
• Operating pressure 500 bar maximum

This Hydraulic Threaded-Body Clamping Module was designed for screwing in into standardized housings, fixture bodies or manifold blocks and fixture base plates or intermediate plates for pallets or machine tool tables. With single and double acting features and anti-torsion device.

ROEMHELD B1.7385 RS Hydraulic Slide: double acting, with 4 guide rods, with optional stroke end control

• Max. operating pressure 250 bar
• Piston diameter: 25 - 100 mm
• Rod diameter: 16 - 60 mm
• Stroke: 50 - 200 mm
• Max. push force: 12.3 - 196.4 kN
• Diameter of the guides: 16 - 50 mm
• Standard or Reinforced version

ROEMHELD B1.5091 Block Cylinders: single acting, with and without spring return.

• Operating pressure 500 bar maximum 
• With and without spring return
• Piston diameter ranges from 16 to 100 mm
• Rod diameter ranges from 10 to 63 mm
• Stroke 8 - 100 mm
• Maximum push force 10 - 392 kN

ROEMHELD B1.450 Hydraulic Threaded Body Cylinders 

• Single acting, spring return with wiper
• Operating pressure 500 bar maximum
• 4 sizes available
• Strokes 8 to 16 mm
• Clamping forces 5.6 to 40 kN at 500 bar

These hydraulic cylinders are threaded directly into the tapped holes of a clamping fixture. They are a compact solution and can be used to great advantage in fixtures where space is at a premium. Hydraulic fluid is supplied through passageways drilled into the fixture body, this reducing the use of hydraulic pipework, fittings and hoses. The built-in spring returns the piston when hydraulic pressure is released. The female threads at the piston rod end is designed to accept a contact bolt.

See datasheet G 3.800 for contact bolts.

ROEMHELD B1.310 Universal Clamping Cylinder: single acting with spring return

OBSOLETE ITEM - CONTACT HYQUIP

• Operating pressure 200 / 500 bar maximum
• Piston diameter ranging from 16 to 63 mm
• Rod diameter ranging from 10 to 40 mm
• Stroke ranging from 8 to 100 mm
• Maximum push force 10 to 156 kN

These universal clamping cylinders are particularly suited for clamping fixtures designed to hold various sizes of workpieces (part families). They can be mounted directly into the fixture wall or installed onto horizontal or vertical mounting brackets which are available as accessories.

ROEMHELD B1.282 Hydro Cylinder with & without stroke end cushioning 

OBSOLETE ITEM - CONTACT HYQUIP

• Double acting
• Operating pressure 200 bar maximum
• Push force 9.8 to 100.5 kN
• Pull force 5.7 ro 61.2 kN
• Stroke, refer to datasheet

This Hydro-cylinder is particularly suitable for fixture building, direct mounting the cylinder head and accurate centring. It is also available with front and rear flange mounting options, these are purchased separately. For operating conditions, tolerances and other data see datasheet A 0.100.

172 Page Hydac Training Manual

The HEYPAC EGX80 is a double acting, free piston, compressed air driven hydraulic pump of infinitely variable delivery for general use wherever a compressed air supply is available. The pump will cycle automatically according to system demand and stall under zero flow conditions with minimal energy consumption. The output flow and pressure depend upon the intensification ratio relative to the air supply pressure and volume.

Heypac's EGX pump is ATEX certified means the pump is approved for operation in potentially explosive atmospheres where flammable gases, vapours, dusts, or mists may be present

Ratio fluid:air - 80:1

P max fluid bar (psi) - 560 (8120)

Q max fluid L/min (US gpm) - 2.5 (0.66)

Q max average fluid L/min (US gpm) - 0.7 (0.18)

The HEYPAC EGX60 is a double acting, free piston, compressed air driven hydraulic pump of infinitely variable delivery for general use wherever a compressed air supply is available. The pump will cycle automatically according to system demand and stall under zero flow conditions with minimal energy consumption. The output flow and pressure depend upon the intensification ratio relative to the air supply pressure and volume.

Heypac's EGX pump is ATEX certified means the pump is approved for operation in potentially explosive atmospheres where flammable gases, vapours, dusts, or mists may be present.

Ratio fluid:air - 60:1

P max fluid bar (psi) - 420 (6090)

Q max fluid L/min (US gpm) - 3.8 (1)

Q max average fluid L/min (US gpm) - 1.0 (0.26)

The HEYPAC EGX010 is a double acting, free piston, compressed air driven hydraulic pump of infinitely variable delivery for general use wherever a compressed air supply is available. The pump will cycle automatically according to system demand and stall under zero flow conditions with minimal energy consumption. The output flow and pressure depend upon the intensification ratio relative to the air supply pressure and volume.

Heypac's EGX pump is ATEX certified means the pump is approved for operation in potentially explosive atmospheres where flammable gases, vapours, dusts, or mists may be present.

Ratio flUid:air - 10:1

P max fluid bar (psi) - 70 (1016)

Q max fluid L/min (US gpm) - 20 (5.3)

Q max average fluid L/min (US gpm) - 5.5 (1.45)

• Maximum flow rate:
  -MFU-E / MFU-S: 15 l/min
  -MFU-P: 10 l/min
• Pump type: Vane pump
• Maximum operating pressure: 4.0 bar