Home

• OD  - 2-1/4"
• ID RANGE - 1.3438 - 1.8750"
• Imperial sizes with a variety of lengths

• OD - 9/16"
• ID RANGE - .2950 - .3438"
• Imperial sizes with a variety of lengths

Carr Lane Head Press Fit Bushings are a variation of standard press fit bushings, featuring a head designed to withstand significant axial loads. These bushings are permanently installed into the jig plate and are typically used for single-operation drilling or reaming, where the bushings are not intended to be replaced throughout the tooling's lifespan. The head of these bushings can either remain exposed or be recessed by counterboring the installation hole.

• OD - 7/16"
• ID RANGE - .2325 - .2913"
• Imperial sizes available with a variety of Lengths

• OD - 13/32"
• ID RANGE - .1870 - .2570"
• Imperial sizes available with a variety of Lengths

ER-series heavy duty caterroller load skates have a rugged and sturdy construction for long life

• Max. Carrying Capacity: 80 ton

Carr Lane’s range of toggle camp accessories include jam nuts, clamping spindles and cushions. Each of these are available in multiple variations of size material and design. This includes steel, stainless steel and vinyl dipped steel options as well as both metric and imperial sizes.

• Available in thread sizes #8-32 to 5/8-11 (M4 to M16 in metric)
• Available in metric and  imperial
• Available in steel, stainless steel and vinyl dipped steel

Marine detent pins are quick-release pins used in applications where grip length isn't important. These alignment pins are are equipped with a on spring-loaded locking ball and has a ring rather than a solid shoulder. They are made to withstand extra corrosion resistance therefore are made of 316 stainless steel. The locking balls use spring force to lock the pin in place and doesn't use positive locking like a ball lock pin. Using these detent pins is easy, simply push the pin to insert and pull to remove.

• Nominal shank dia: 3/16" - 1/2"
• Grip lengths (inches): 0.50 to 4.00
• Shank diameters from 3/16” to 1/2”, each available in a choice of several standard grip lengths

These heavy-duty cast iron bar knobs are designed for easy hand rotation, and can be securely tightened by inserting a bar through the prongs. It is offered in three sizes, with options for a blank or tapped version, featuring hole sizes ranging from 3/8-16 to 1"-8 (M10 to M24 in metric).

• Available in three different sizes, each with either blank or tapped holes
• Available in Metric and Imperial sizes

The nut rotates smoothly without shifting, ensuring the contact pad stays in place to prevent any movement or damage to the workpiece. It is offered in tapped-hole sizes ranging from 1/4-20 to 3/4-10 (M6 to M12 in metric). These are available in hardened steel and a black oxide finish.

• Thread: 1/4-20 - 3/4-10 or M6 - M12
• Hardened Steel, Black Oxide Finish
• Metric and Imperial sizes

Use the Enerpac CT-604 to relieve hydraulic back pressure by safely bleeding the hydraulic coupler

NOTE: For use on C-Series 700 bar High-Flow Couplers only

Enerpac V-Series hydraulic pressure and flow control valves are rated for 700 bar operating pressure and are painted, coated, or plated for corrosion resistance

A precision tooling ball serves as a reference for essential inspection, layout, and machining tasks. The shoulder type design includes a precision height-reference shoulder that ensures accurate three-dimensional positioning of the ball. The concentricity between the ball and shank is maintained within a tolerance of .0002" TIR. These balls are available in sizes of 1/4", 3/8", 1/2", and 3/4" (6mm, 12mm, and 20mm in metric), and are offered in both steel and stainless steel materials.

• Thread: #6-32 or M3.5
• Threaded and Un-Threaded
• Metric and Imperial
• Length: .47 - 1.50