Home

Carr Lane Slotted-Heel Gooseneck Clamp Straps are engineered to recess the clamping nut, offering a compact overall profile. These clamp straps feature a slot underneath, allowing them to slide straight back for easy loading. Each side has a rear indentation for a secure grip when retracting the clamp. The Slotted-Heel Gooseneck Clamp Straps displayed here are designed for the Standard System MF40 (1/2-13 stud size). They can be assembled into either a low or tall clamp assembly by selecting the appropriate short or long Clamping Studs and Clamp Rests.

• Metric and Imperial sizes available
• Thread - 1/2 or M12
• Length - 4.92 - 5.91

Due to their self-retaining design, these press-fit ball plungers can be easily installed into a standard drilled hole. The slotted end of the thermoplastic body expands to compensate hole tolerances of up to .008" oversize. The sturdy shoulder ensures a secure seating position and effectively resists detent force. The installation hole can be counterbored to accommodate the shoulder. They are available in four sizes, from 3/16 to 1" diameter.

• Available in four sizes
• External Diameter - .188 - .500
• Thermoplastic Body and Stainless Steel Ball

 Carr Lane Diamond-Groove Bushings are manufactured for cast-in-place or potted setups. Their diamond-knurled outer diameter offers superior grip, resisting both rotational and axial forces effectively. As the outer diameter is not ground, it’s essential to precisely position the inner diameter during casting or potting to ensure the completed tool’s accuracy.

• OD - 3/4"
• ID RANGE - .3125 - .5312"
• Imperial sizes with a variety of lengths

• OD  - 2-1/4"
• ID RANGE - 1.3438 - 1.8750"
• Imperial sizes with a variety of lengths

• OD - 9/16"
• ID RANGE - .2950 - .3438"
• Imperial sizes with a variety of lengths

Carr Lane Head Press Fit Bushings are a variation of standard press fit bushings, featuring a head designed to withstand significant axial loads. These bushings are permanently installed into the jig plate and are typically used for single-operation drilling or reaming, where the bushings are not intended to be replaced throughout the tooling's lifespan. The head of these bushings can either remain exposed or be recessed by counterboring the installation hole.

• OD - 7/16"
• ID RANGE - .2325 - .2913"
• Imperial sizes available with a variety of Lengths

• OD - 13/32"
• ID RANGE - .1870 - .2570"
• Imperial sizes available with a variety of Lengths

ER-series heavy duty caterroller load skates have a rugged and sturdy construction for long life

• Max. Carrying Capacity: 80 ton

Care Lane’s range of toggle camp accessories include jam nuts, clamping spindles and cushions. Each of these are available in multiple variations of size material and design. This includes  steel, stainless steel and vinyl dipped steel options as well as both metric and imperial sizes.

• Available in thread sizes #8-32 to 5/8-11 (M4 to M16 in metric)
• Available in metric and  imperial
• Available in steel, stainless steel and vinyl dipped steel

Marine detent pins are quick-release pins used in applications where grip length isn't important. These alignment pins are are equipped with a on spring-loaded locking ball and has a ring rather than a solid shoulder. They are made to withstand extra corrosion resistance therefore are made of 316 stainless steel. The locking balls use spring force to lock the pin in place and doesn't use positive locking like a ball lock pin. Using these detent pins is easy, simply push the pin to insert and pull to remove.

• Nominal shank dia: 3/16" - 1/2"
• Grip lengths (inches): 0.50 to 4.00
• Shank diameters from 3/16” to 1/2”, each available in a choice of several standard grip lengths

These heavy-duty cast iron bar knobs are designed for easy hand rotation, and can be securely tightened by inserting a bar through the prongs. It is offered in three sizes, with options for a blank or tapped version, featuring hole sizes ranging from 3/8-16 to 1"-8 (M10 to M24 in metric).

• Available in three different sizes, each with either blank or tapped holes
• Available in Metric and Imperial sizes