M-Z4SEH Series 2x
On/off directional seat valves with electro-hydraulic actuation M-Z4SEH 4/2 pilot operated Sandwich plate design
- Size 10 and 16
- Component series 2X
- Maximum operating pressure 315 bar
- Maximum flow 300 l/min
Home
Categories
Showing 1189 to 1200 of 1933 items
Z2S 22 Series 5x
Pilot operated On/off check valves of sandwich plate design Z2S 22
- Size 25
- Component series 5X
- Maximum operating pressure 315 bar
- Maximum flow 450 l/min
AZPU Size 22 to 63
External gear pumps type AZPU SILENCE version fixed pumps
- Platform G
- Fixed displacement
- Nominal size 22 to 63
- Continuous pressure up to 250 bar
- Intermittent pressure up to 280 bar
A7VO Series 63 Size 250 to 500
Bosch Rexroth Variable displacement axial piston pumps A7VO
- Series 63
- Size 250...500
- Nominal pressure 350 bar
- Peak pressure 400 bar
- Open circuit
A10FZO, A10VZO, A10FZG, A10VZG SIZE 3 TO 180
Bosch Rexroth Fixed and Variable Hydraulic Axial Piston Pumps for use with variable speed drives
- Suitable for variable-speed operation with synchronous and asynchronous motors
- Sizes 3 to 180
- Nominal pressure/maximum pressure see technical data
- Open and closed circuits
A10FZO AND A10FZG (FIXED)
A10VZO AND A10VZG (VARIABLE)
Minibooster HC3-D
HC3 - D versions: 11 different intensification factors
- PIN: 20 - 207 bar (inlet pressure)
- PH: 500 bar maximum (outlet pressure)
- PRETURN: As low as possible (Return pressure to tank)
- Intensification ratios: PH = (PIN - PReturn) i (Intensification)
- Mounting: Manifold system miniBOOSTER pattern
£0.00
£0.00 Inc. VAT
Hilma High Load Roller Track, Hydraulically Lifted
High load roller track
Pull Clamping Element with T-slot
HILMA WZ 4.2350 Pull Clamp with T-Slot that facilitates a die standardisation by means of a T-slot bar or T-nuts on the die
- Max. pulling force 55 - 144 kN
- For T-slot: 18 - 28 mm
- Piston diameter: 70 - 105 mm
- Clamping stroke: 6 mm
Flat Clamping Bar, Single Acting
HILMA Single-Acting Flat Clamping Bar, on die bending presses and folding presses for the upper die and on the press slide.
Wedge Clamps for Tapered Clamping Edge with Cooling Circuit...
HILMA WZ 2.2410 Wedge Clamps for Tapered Clamping Edge double acting, max. clamping force 100 to 630 kN, with cooling circuit for temperatures up to 250 °C
- Max. clamping force: 100 .. 630 kN
- Operating pressure: 200 .. 350 bar
- Valve voltage: 24 VDC
- Max. temperature: 100 °C
Multiple Clamping System MSH
MSH - The Multiple Clamping System with trifold range of systems: Premium, EasyClamp, Goliath
Hydraulically Extending Work Supports with Spring Force Contact
ROEMHELD B1.914 Work Supports: Extending hydraulically – contact by spring force, double acting
OBSOLETE ITEM - CONTACT HYQUIP
- Maximum operating pressure 500 bar
- External thread: M68
- Maximum load force: 20 kN
- Plunger diameter: 32 mm
- Plunger stroke: 12 mm
- Maximum flow rate: 35 cm³/s
- Elastic deformation: 1.3 µm/kN
Work supports are used to provide a self-adjusting rest to avoid deflection and vibration of the workpieces during machining. It is recommended to use double-acting elements if applied in larger hydraulic clamping fixtures with long lines, especially if the return oil is cycled and has to return in a predetermined time.
£0.00
£0.00 Inc. VAT
Showing 1189 to 1200 of 1933 items
Hyquip Engineering Services
Our team have over 35 years in the business, and experience in many industrial sectors. From design and project management, to refurbishment and repair, they can provide the solutions you need.