Home

HYDAC AFLD Reversible Inline Filters are built to meet API 614 standards for lube oil systems and other demanding applications. Designed for flow rates up to 1700 l/min and pressures up to 40 bar, they offer reliable operation with ANSI flanged connections and easy changeover via an integrated transfer valve.

Key Features:

• Flow rates up to 1700 l/min
• Pressure levels up to 40 bar
• API 614-Compliant - ideal for lube oil and critical systems

The HYDAC "DH" Stainless Steel Pressure Elements are designed for demanding hydraulic applications, offering reliable filtration under high differential pressures up to 210 bar and extreme operating temperatures up to 400°C. Compatible with "D" type filter housings, these elements provide robust performance using a range of filter media including Betamicron®, Chemicron®, and wire mesh. Key features are as follows:

• Withstands high differential pressures up to 210 bar and temperatures up to 400°C
• Available with multiple filtration media options: Betamicron®, Chemicron®, and wire mesh (1 µm to 250 µm)
• Durable stainless steel construction for long service life in harsh operating environments

MRS-Series positive clamping cylinders are designed for prolonged clamping applications in moveable machine parts, tools, fixtures, pallets and workpieces

• Force: 8,5 - 45,9 kN
• Stroke: 2,2 - 5,5 mm
• Pressure: 135 - 350 bar

Electronic signal encoders VT 10399

• Component series 3X
• Two-axis version

Type KBVS valves are pilot-operated proportional pressure relief valves in seat design and are used for limiting the pressure in hydraulic systems

• Size 3
• Series A
• Maximum working pressure 350 bar
• Maximum flow 200 l/min

Bosch Rexroth Variable displacement axial piston pumps A15VSO, A15VLO open circuit

• Size: 110 ... 280
• Nominal pressure: 350 bar
• Maximum pressure: 420 bar

ROEMHELD B1.930 Work Support, Self-Locking: with pneumatic position monitoring, 3 sizes, 2 types of function, double acting

• Max. operating pressure 500/400 bar
• Cross section of the body: 70x48 - 140x105 mm
• Max. load force: 8 - 40 kN
• Plunger diameter: 16 - 40 mm
• Plunger stroke: 8 - 20 mm
• Max. flow rate: 25 cm³/s
• Elastic deformation: 0.7 - 1.0 µm/kN

ROEMHELD B1.8806 Swing Clamps without Swing Stroke: top flange, reinforced swing mechanism, position monitoring optional, double acting

• Maximum operating pressure 350 bar
• Maximum clamping force: 5 - 18 kN
• Rod diameter: 20 - 40 mm
• Piston diameter: 25 - 50 mm
• Clamping stroke: 12 - 20 mm
• Maximum flow rate: 5 - 36 cm³/s

The swing clamp without swing stroke is a double-acting pull-type cylinder where a part of the piston stroke is used to swing the piston rod without axial stroke.

The Equalizer Hydraulic Double-Acting Hand-Pump range has an output regulated to 700 bar delivered from a pair of output ports, each threaded 3/8” NPT. The diaphragm oil-reservoir design means that, unlike conventional units, the hand-pumps are operable at all angles and are highly resistant to accidental spillage of hydraulic fluid.

Captive Locating Screws can be used for locating and clamping, or for clamping only, by selecting the appropriate screw length. The locating screw's precision-ground body is positively retained in a locking bushing and in fully retracted position, the bushing's spring clip snaps into the body's radial groove, holding the fully retracted screw by spring force and positively prevents removal. Spring pressure also holds the screw in intermediate extended positions, an advantage especially if the fixture is turned upside down. Available in thread sizes from 1/4-20 to 1/2-13.Locking-Pin Bushings are designed to press fit in a standard reamed hole. Secure with the included Lock screw to positively hold the bushing in place. Shorter or longer bushings are available in most sizes, for thinner or thicker plates.

These Heavy-Duty® Swivel Hoist Rings feature a centre through-hole instead of a bolt, allowing for mounting with a custom anchoring system. The forged alloy-steel ring pivots 180° and swivels 360°, enabling lifting from any direction. With a safety factor of 5:1, these hoist rings are available in load capacities up to 24,000 lbs. Patents include 4,570,987, 4,641,986, 5,405,210, and others pending.

• Load Rating: 7000 - 24,000 lbs
• Patent no. 4,570,987, 4,641,986, 5,405,210

The HYDAC ETS 4148-H is a compact electronic temperature transmitter with HSI sensor recognition, designed for seamless integration with HYDAC measuring instruments. It offers automatic sensor detection, data transfer, and configuration, ensuring easy setup and reliable temperature measurement from -25 to +100 °C. With its robust design, IP67 protection, and excellent EMC performance, it's ideal for demanding industrial environments.

Key Features:

• Measuring range: -25 .. +100 °C
• Probe length: 6 mm
• Mechanical connection: G1/4 A DIN 3852