Home

Carr Lane Tapped-Heel Padded Clamp Straps include a replaceable clamping pad secured with two screws. They also fit to custom pads or other attachments. The straps are available to accommodate stud sizes ranging from 1/4-20 to 1/2-13, with various strap length options. Each side has a tapped hole at the rear for installing a Finger Pin. This clamp strap can be ordered by itself, or in a complete clamp assembly. The available assemblies are assembly with hex-head clamping screw, assembly with hand-knob clamping screw, assembly with levelling foot and assembly with clamp rest.

• OD - 8 - 105mm
• ID RANGE - .35 - 85.00mm
• Metric sizes with a variety of lengths

• OD - 1-3/8"
• ID RANGE - .6250 - 1.0312"
• Imperial sizes available with a variety of Lengths

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 1-1/8"
• ID RANGE - .7656 - .8465"
• Imperial sizes available with a variety of Lengths

Single-acting hydraulic nut cutter and hand pump for splitting and removing a stuck nut.

• 10 to 20-ton cutting force
• Hexagon Nut Range (mm): 19 to 41
• Bolt Range (mm): M12 to M27
• Not to be used on square nuts

This precision indexing plunger features a user-friendly knob handle for easy retraction. The mounting plate version installs securely with two flat-head screws and is offered with either a short or long plunger extension.  Designed for strength and durability in a compact form, it includes a hardened and ground plunger. Offered in two configurations: locking and non-locking.

• Short or Long plunger extension
• Locking and Non-locking configurations

A compact threaded contact bolt featuring an integrated swivel ball secured by a retaining ring. The flat gripper surface is precisely machined directly onto the swivel ball. A built-in stop ensures the ball doesn't swivel beyond a certain point. This component can function as either a contact bolt or a support. It is offered in thread sizes ranging from #10-32 to 5/16-18 (M6 to M8 in metric), with various length options available. For larger sizes, refer to the Gripper Swivel Contact Bolts.

• Thread: #10-32 - 5/16-18 or M6 - M8
• Metric and Imperial sizes
• Hardened Tool Steel (Serrated), Hardened Steel (Flat) and Delrin­® (Flat)

The HYDAC Filtromat OF 5 with integrated FCU is a mobile filtration unit designed for filling, emptying, and offline filtration of hydraulic and lubrication oils. With a flow rate of up to 40 L/min, it ensures effective particle removal while simultaneously monitoring contamination levels via the built-in FluidControl Unit FCU 2000.

Key Features:

• Flow rate: max. 40 l/min
• Operating pressure: 4.5 bar

The HYDAC Contamination Sensor CS 2000 Series is a high-precision stationary sensor designed for continuous monitoring of particle contamination in hydraulic and lubrication systems. With a fluid temperature range of 0 to +70 °C and flow rates from 10 to 200 ml/min, it offers advanced electronic and hydraulic compensation for pressure and viscosity fluctuations, making it ideal for critical applications requiring reliable, real-time contamination trend analysis.

Key Features:

• Fluid temperature range: 0 ... +70 °C, +32 ... +185°F
• Measurement flow rate: 10 ... 200 ml/min
• Supply voltage: 24 V DC, ± 25%

The HYDAC HDA 4300 pressure transmitter (CSA version) is engineered for hazardous locations in North America, where explosive gases or dust may be present. Built on the proven HDA 4000 platform, it features a rugged ceramic sensor for reliable low-pressure monitoring in demanding applications such as oil and gas, turbines, and dusty industrial settings.

Key Features:

• CSA-certified (1760344) for use in intrinsically safe and non-incendive environments.
• Accurate and stable output with a 4–20 mA signal and typical error of ≤ ±0.5% FS.
• Robust design suited for harsh and dust-heavy industrial conditions.

HYDAC Inline Pressure Filters DFNF/LFNF ensure efficient filtration in hydraulic systems with flow rates up to 100 l/min and pressure levels up to 100 bar. Designed for reversible flow, they feature a screw-in filter bowl, clogging indicator connection, and optional bypass cracking pressure, providing reliable contaminant control and system protection.

Key Features:

• Flow rates up to 100 l/min
• Pressure levels up to 100 bar
• Connections: G½ to G1