Home

HYDAC Reversible Inline Filters FMND, built in accordance with DIN 24550, offer efficient filtration for hydraulic systems with flow rates up to 400 l/min and pressure levels up to 250 bar. Designed with a steel filter bowl and an integrated change-over valve, they ensure smooth operation, while features like a clogging indicator connection and optional oil drain plug enhance system protection and maintenance ease.

Key Features:

• Flow rates up to 400 l/min
• Temperature range: -10 °C to +100 °C
• Pressure levels up to 250 bar

The HYDAC MFX Inline Filter offers compact and robust filtration for systems operating up to 50 bar and 130 l/min. With multiple clogging indicator options and a standard bypass valve, it ensures reliable protection in return and pressure line applications.

Key Features:

• Flow Capacity: Up to 130 l/min
• Pressure Rating: Up to 50 bar
• Bypass Valve: Standard, 3.5 bar cracking pressure (optional 1.7 bar)

Key Features:

• Absolute filtration with high-efficiency filter media including glass fibre, meltblown, and solid plastic
• Robust performance under differential pressures up to 20 bar and temperatures up to 100°C
• Built-in Quality Protection system to prevent third-party element installation and maintain system reliability

The HYDAC "MX" Inline Pressure Filter Elements provide reliable absolute filtration for low-pressure systems, with ratings from 5 to 20 µm and compatibility up to 20 bar and 100°C. Designed for MFX housings, they feature HYDAC Quality Protection to prevent third-party replacements and ensure consistent system performance.

70 bar system valves 70 bar system valves provide control within the fixture circuit

• Max Pressure: 70 bar (1000 psi)

FN, MF, BS-Series cylinder accessories are provided so that you can effectively position, mount and actuate Enerpac hydraulic cylinders according to your specific fixturing or production applications

Directional spool valves with wet-pin DC voltage solenoids KKDEN8 N/P, 3/2 direct operated 

• Component size 8
• Component series A
• Maximum operating pressure 250 bar
• Maximum flow 20 l/min

On/off cartridge type check valves M-SR 

• For installation in block designs as angle valve
• Size 8 … 30
• Series 1X
• Maximum operating pressure 420 bar
• Maximum flow 400 l/min

Bosch Rexroth Variable Displacement Axial Piston Pumps A1VO Open Circuit

•  For load-sensing systems in smaller working machines
•  Sizes 18, 28, 35
•  Nominal pressure 250 bar
•  Maximum pressure 280 bar
•  Open circuit

ROEMHELD B1.9470 Threaded-Body Work Supports: with metallic wiper edge, single acting

• Maximum operating pressure 70 bar
• External thread: M26 - M45
• Maximum load force: 3 - 10 kN
• Plunger diameter: 10 - 16 mm
• Plunger stroke: 6.5 - 10 mm
• Maximum flow rate: 25 cm³/s
• Elastic deformation: 3.5 - 9 μm/kN

The support plunger is hydraulically extended by a small piston and contacts the workpiece with spring force. The pressure can be easily exchanged. Locking of the support plunger through the slotted clamping sleeve is made by means of a ring-shaped conical hydraulic piston where the locking force is transmitted by a low friction ball shell. Unlocking and retracting of the support plunger is made by spring force.

ROEMHELD B1.8812 Swing Clamps with Reinforced Swing Mechanism: bottom flange, position monitoring optional, pendulum eye/fork head

• Maximum operating pressure 500/160 bar
• Maximum clamping force: 1.4 - 11.2 kN
• Rod diameter: 20 - 32 mm
• Piston diameter: 25 - 40 mm
• Clamping stroke: 22 - 25 mm
• Maximum flow rate: 8 - 20 cm³/s

The hydraulic swing clamp is a double-acting pull-type cylinder where a part of the total stroke is used to swing the piston.

The FSH-Series parallel wedge spreader offer controlled separation without bending or risk of slipping from the joint. These spreaders are ideally suited to flanged joint applications

• Maximum Operating Pressure: 700 bar
• Tip Clearance: 6 mm
• Maximum Spread: 80 mm
• Maximum Spread Force: 14 ton

HC63 versions: 9 different intensification factors

• P_IN: 20 – 207 bar (inlet pressure)
• P_H: 800 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN – P_Return) i (intensification)
• Mounting: Inline tube / HP-flange mounting (optional)