Home

Carr Lane double end clamp straps are heavy duty clamp straps with two clamping ends that are identical. Strap can be turned 90° to allow for clear loading. These are available to accommodate stud sizes from 1/4-20 to 3/4-10 (M6 to M20 in metric), each in a range of strap lengths. These clamp straps can be ordered individually or as part of a complete clamp assembly. The assemblies available including assembly with spherical nut & washer, assembly with flange nut, assembly with hand knob & spherical washer, assembly with acorn nut & spherical washer, assembly with bar knob & spherical washer and assembly with cam handle & spherical washer.

• Straps and six different types of assembly
• Metric and Imperial sizes available
• Thread - 1/4-20 - 3/4-10 or M6 - M20

Carr Lane Head Press Fit Bushings are a variation of standard press fit bushings, featuring a head designed to withstand significant axial loads. These bushings are permanently installed into the jig plate and are typically used for single-operation drilling or reaming, where the bushings are not intended to be replaced throughout the tooling's lifespan. The head of these bushings can either remain exposed or be recessed by counterboring the installation hole.

• OD - 4mm - 125mm
• ID RANGE - .35mm - 105.00mm
• Metric sizes available with a variety of Lengths

Carr Lane Press fit bushings are the most common yet most cost-effective type of drill bushing in the range. P-style drill bushings are the most common and cost-effective type of drill bushing. These bushings are permanently installed into the jig plate, typically flush with the top surface. Press fit bushings (P- style) bushings are primarily used for single-operation drilling or reaming, particularly when there is no expectation of replacing the bushings throughout the tooling's lifespan. They can be mounted closer together than headed bushings but provide less resistance to heavy axial loads. These are available in both ground and unground variants. Standard bushes are listed below however configurations are available on enquiry.

• OD - 1-1/2"
• ID RANGE - 1.0156 - 1.1417"
• Imperial sizes available with a variety of Lengths

LW-Series Hydraulic Vertical Lifting Wedges require a very small access gap of only 10 mm

• Max. Lifting Force: 16 ton
• Lifting Stroke: 21 mm
• Tip Clearance / Max. Spread: * 10 mm / 81,5

*Maximum spread 81,5 mm when using optional stepped block LWB-1

This precision height locator features a threaded shank for easy installation into a tapped hole. Its cone shape offers a minimal contact area while ensuring a large, stable base. Screw Rest Pads are highly versatile, serving as supports, side locator pads, and jig feet. They are available in thread sizes ranging from 5/16-18 to 5/8-11 (M8 to M16 metric) and come in various support heights up to 2" (50mm metric).

• Thread: 5/16-18 - 5/8-11 or M8 - M16
• Metric and Imperial sizes
• Steel Black Oxide Finish

Carr Lane’s mill fixture keys are detachable fixture keys designed to fit into a 7/8" reamed hole. It accommodates two table-slot sizes (11/16" and 13/16") with a simple 90° rotation. The keys can be removed before machining, once the fixture is securely attached. The crossholes on the top simplify insertion and removal. Offers concentricity within .0005" TIR. Available in two lengths: standard or extra-long.

Spring Locating Pins are press-fit components designed to provide a compact solution for applying side force to a workpiece, ideal for positioning or light clamping. This range of Spring-Loaded Locating Pins are crafted from materials like Steel, Stainless Steel, and Delrin®. These pins come in five body diameter sizes, ranging from ¼” to 5/8”, and are available in light, medium, and heavy force options across most sizes.

• 5 body diameter sizes available
• Light. medium and heavy force options
• Hardened Steel, Stainless Steel and Delrin Pin

Carr Lanes Solid handles are available in 5 different thread sizes in both metric and imperial sizes. This range offers a both stainless steel and steel options alongside various other finishes to choose from including  thermoplastic and phenolic plastic. These handles come in a selection designs each manufactured to ensure optimal performance on any application.

• Size - 1 - 5
• Metric and Imperial sizes available
• Stainless Steel and Steel
• Thread: 1/4-20 - 1/2-13 or M6 - M12

• Straight Equal Coupling
• DIN 2353/ ISO 8434-1
• L Light Series from 6mm to 42mm OD
• S Heavy Series from 6mm to 38mm OD
• Pressure 100 bar to 630 bar, Subject to Series and Pipe size 
• Zinc Plated with Trivalent Passivation 
• Supplied with Tube Nut & Olive (Cutting Ring/ Ferrule) 

The HYDAC CSM1320-2-1-W/N/X60/O60/-AS is a compact online sensor module for continuous monitoring of particle and water contamination in hydraulic and lubrication fluids. With a built-in gear pump and AquaSensor AS 1000, it’s ideal for proactive maintenance in industrial systems.

Key Features:

• Total flow rate: ≈ 180 ml/min
• Permitted outlet pressure: 5 bar max
• AS = with AquaSensor AS 1000
• Pump type: Gear pump

The HYDAC FT 5 is a mobile unit for transporting 200 L oil barrels and filtering hydraulic or lubrication oils at up to 40 l/min. It ensures clean filling, easy handling, and reduced system downtime.

Key Features:

• Flow rate: max. 30 l/min / 40 l/min
• Operating pressure: 4.5 bar
• Convenient filtration in bypass flow

The HYDAC ETS 7000 is a compact electronic temperature transmitter ideal for OEM and mobile applications, measuring -25 to +100 °C. With high pressure resistance up to 600 bar, analogue outputs (4–20 mA / 0–10 V), and IP67 protection, it ensures reliable performance in demanding environments.

Key Features:

• Measuring ranges: -25 .. +100 °C
• Pressure resistance: 600 bar
• Overload pressure: 900 bar