Home

HYDAC Pressure Filter DFN, designed in accordance with DIN 24550, provides reliable filtration for hydraulic systems with flow rates up to 400 l/min and pressure levels up to 400 bar. Featuring a screw-in filter bowl, clogging indicator connection, and compatibility with various hydraulic fluids, it ensures efficient contaminant control and system protection.

Key Features:

• Flow rates up to 400 l/min
• Pressure levels up to 400 bar
• Connections: G½ to SAE DN 40

Key Features:

• Reliable filtration improves system uptime
• Long service life with high dirt-holding capacity
• Operational dependability through maintained fluid cleanliness

HYDAC Filter Elements are engineered to deliver reliable and efficient filtration for hydraulic systems, ensuring maximum system performance and protection. Designed for use in return line, suction, and pressure filter configurations, these elements support a wide filtration range from 3 µm to 200 µm (1 µm available on request) and pressure stability from 10 to 210 bar.

Directional spool valves with wet-pin DC voltage solenoids KKDER8 C/G/U, 3/2 direct operated 

• Component size 8
• Component series A
• Maximum operating pressure 350 bar
• Maximum flow 30 l/min

HC7 versions: 5 different intensification factors

• P_IN: 20 - 207 bar (inlet pressure)
• P_H: 2000 bar maximum (outlet pressure)
• P_RETURN: As low as possible (Return pressure to tank)
• Intensification ratios: P_H = (P_IN - P_Return) i (Intensification)
• Mounting: Inline tube

ROEMHELD B1.8310 Electric Swing Clamps

• Axial pulling force: 3 - 9 kN
•  Top flange, with position and clamping force monitoring
•  DC voltage 24 V
• Minimum energy demand

The electric swing clamp is driven by a brushless DC motor. The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod. For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.

These precision locating pins are ideal for positioning workpieces due to the broad range of available head diameters, allowing them to fit machined holes in the part.  Along with standard diameters, custom head sizes ranging from .1150" to 1.0400" can be quickly produced in .0001" increments to meet specific requirements.  Typically, a Round Locating Pin and a Diamond Locating Pin are used together to align from two holes without causing interference, as the Diamond Locating Pin is specially relieved for this purpose. The press-fit shank is designed for permanent installation whereas the lockscrew variant is manufactured with a slip-fit shank for renewable installation.

• Round and Diamond
• Metric and Imperial sizes
• Shank Diameter - 5/16 - 1

 Optimized medium pressure pump for high power machines

•  Sizes 45 to 180
•  Nominal pressure 280 bar (4100 psi)
•  Maximum pressure 350 bar (5100 psi)
•  Open circuit

HC7-U: 6 different intensification factors

• P_IN: 20 – 207 bar (inlet pressure)
• P_H: 2000 bar maximum (outlet pressure)
• P_RETURN: As low as possible (return pressure to tank)
• P_OUTLET: P_H = (P_IN – P_Return) x i (intensification)
• Mounting: Inline tube

Enerpac RC-Series DUO single acting hydraulic cylinders set the industry standard for general purpose cylinders

• Max Operating Pressure: 700 bar
• Cylinder Capacity (ton): 5 to 95
• Stroke (mm): 16 to 362

The speed handles are designed with added weight for rapid turning as well as a long arm extension fitted to offer superior leverage for hand tightening. Available in two sizes, each comes in either a blank or tapped-through option, with tapped-hole sizes ranging from 1/2-13 to 3/4-10 (M12 to M20 in metric).

• Double arms available in Metric & Imperial
• sizes ranging from 1/2-13 to 3/4-10
• sizes ranging from M12 to M20 in metric 

Hex head handle expanding pins are alignments pins that expand to offer the highest tolerance alignment of two holes possible. Created with female split bushings separated by male segments formed on centre spindle that is allowed to expand when drawn together. They are available in standard pin diameters from 1/4" to 3/4" in a range of different lengths

• External Diameter - 1/4 - 3/4
• Grip Length - 0.50 - 4.00

The precision rest pad features a wide contact surface, precisely ground for accurate height positioning. It can be mounted using two socket-head cap screws (not included). Jig Leg Plates serve as versatile supports, side locator pads, and feet for jigs. They are offered in three different sizes.